Sand trap Urban-I 150. Cast iron VIBRATION grid. L=0.5m. D400KN

Self-supporting sand trap Type I in accordance with EN1433. High-quality self-compacting concrete C55/67 provided with a reinforcement mesh. 100% recyclable cast iron and concrete. Resistant to frost, weather, salts, oil and petrol, etc. Due to its design, the sand traps have a built-in resistance of strength class D, 400 kN. The proposed resistance is guaranteed by the whole. The sand traps have a tongue and groove connection and a recess for a safety joint (SF). If the design is liquid-tight, this recess must be sealed. The top of the sand trap is equipped with an integrated edge protection made of galvanized steel (thickness 4 mm), anchored in the concrete (height 3 cm). The sand trap complies with the European Standard EN1433. Dimensions: length 50 cm; inner width 15 cm; outer width 22.9/21.4 cm (bottom/top); fixed height 51.2 cm. A cast-in sleeve is provided on one side for connection to the sewer with Ø 160 mm. On the other side there is a knockout of 200 mm. This can optionally be used for an additional connection to the sewerage system. Weight 80kg. With dirt bucket Aesthetic slot grille VIBRATION. Pre-assembled grate made of nodular cast iron GJS 600-10. This type of cast iron has exceptional fracture resistance (up to 600 Mpa) and high elasticity (up to 470 Mpa). The high cast iron quality allows to obtain an aesthetic grille with a high inlet capacity of 680 cm2/lm. Length 50cm; 4x bolted with stainless steel bolts. The grille complies with load class D, 400 kN according to the European Standard EN 1433. The slot width of 18 mm is in accordance with the requirements for PPE. This makes it very suitable for the passage of people with reduced mobility, pedestrians, cyclists and shopping carts. Supplied as standard in black; other RAL colors available on request.