Stainless steel drain S200, 200mm wide
External width 200 mm, internal width 128 mm, bearing edge 160 mm. Material Stainless steel AISI 304 (1.4301), Plate thickness 2 mm. Inverted pleated U-edge (outer edge) with solid stainless steel full material edge reinforcement against mechanical and thermal stress in accordance with EHEDG. Longitudinal and transverse slope with 0.5%/m , 1%/m or other. Kinked, flat or round bottom. Round intermediate bars in the gutter from height 80mm, adjustable feet and concrete anchors. Strands (>= 4000/6000 mm) can be connected by means of screwable EPDM coupling flanges. Equipped with (anti-slip) reinforced bar grid, width 157 mm, length 500 mm or 1000 mm. Load class M 125 kN according to EN 1253 ((forklift traffic). The circumferential upper edge is ground with 240 grit. Pickled by immersion and passivated finish.