Stainless steel drains and gutters

Stainless steel drain - floor drain

Are you looking for a solution to allow water to drain well or quickly through the floor? Then you have come to the right place. At DWTN you will find the stainless steel floor drain for your application. The sinks are suitable for various workplaces, such as industry or industrial kitchens, or for construction. You may mainly think of indoor applications, but you will also find a suitable solution for outdoor use with us. The stainless steel drain is made of AISI 304, AISI 316 or AISI 316Ti as standard. The stainless steel (stainless steel) used is 1.5 to 2 millimeters and is resistant to corrosion (attack by chemical substances). As a result, the drains last a long time and require little maintenance. A stainless steel floor drain has several advantages. This makes it easy and simple to install. Thanks to a good construction, the stainless steel drain is easy to clean. This is useful, because hygiene is important in many work areas. There are also various cover options, so that there is always a drainage well that suits your application. If your space is already flooded, we also have a solution for you: a submersible pump . That is a pump that, when submerged in water, still does its job and therefore pumps the water away.

Many possibilities with stainless steel drain

Stainless steel floor drains are available in different versions, for different applications. There are drains for industry, chemical and pharmaceutical zones, saunas, swimming pools, healthcare and industrial kitchens. Which type you need depends on the load, the amount of water to be drained (the drainage flow rate) and the thickness of the floor. Many of the above applications are indoors, but we also have suitable outdoor options for you. The stainless steel drains can be divided into five categories: industrial drains with vertical outlet, industrial drains with horizontal outlet, mini drains with vertical outlet, mini drains with horizontal outlet and lowered drains with vertical outlet. These categories can in turn be divided into one-piece and two-piece drains. In our documentation folder you can find a diagram that makes it clear which drain you need. Different sizes are available and the different stainless steel floor drains are adjustable in height. This makes them suitable for many applications.

Different covers for drain stainless steel

The choice of cover also depends on your specific application. You can choose from a slot grid, a non-slip mesh grid, a bar grid and a plate grid. For example, trench drains are widely used in the food industry and mesh drains in construction. Are you still unsure about which stainless steel drain is the best option for you? Please contact one of our employees. They are happy to help you make a good choice. You can request a quote easily and without obligation via our website. You will receive this within one to two working days, so that you can quickly see what your required materials cost. DWTN has been a supplier of drainage products for 25 years. Thanks to our wide range, you can find suitable products for many applications. We always have a wide range in stock, so we can serve you quickly. We are happy to deliver your new drainage products to your home, but you can also pick them up.

 

Stainless steel drainage gutter grid gutter

Our high-quality stainless steel grid channels are made to customer specifications. If you are looking for a standard grid gutter or a special size or shape, you have come to the right place. The stainless steel grid channels are made of austenitic stainless steel (AISI 304) 1.4301, (AISI 316L) 1.4404 or (AISI 316Ti) 1.4571, according to the PN-EN 1253 standard. They serve to collect medium and large amounts of water and to discharge the waste water into the sewage system.
The grid channels are made of a 2 mm plate thickness, have a bent or flat bottom and a built-in slope. Each gutter has adjustable feet and concrete anchors to ensure installation and anchoring. A grid fits as a cover with a grid gutter. Depending on the application, water flow rate and load, we have slot (perforated) grids, (anti-slip) mesh grid, (anti-slip) reinforced bar grid or a plate grid.
The water that is drained into the gutter flows through a drain (with a removable stench trap and dirt bucket) into the sewerage system. The drain is always produced and connected to the gutter, so that together they form a whole.

Application possibilities stainless steel grid channels

The stainless steel grid gutters are used in the food industry, industrial kitchens, swimming pools, saunas, in hotels, restaurants and other catering establishments. Also for applications in the non-residential construction, chemical and pharmaceutical industry. In addition, stainless steel drainage is also mandatory in areas where sanitary and hygienic regulations apply. Before proceeding to production, our engineers draw up what the gutter should look like in consultation with the customer. (width, length, height, slope, discharge, etc.). Before they leave the factory, the drains are completely pickled and passivated. It is also checked for dimensional stability and watertightness.

 

Stainless steel slotted gutter - slotted gutters

Our high-quality stainless steel slotted gutters are made to customer specifications. If you are looking for a standard slotted gutter or a slotted gutter in a special size or shape, you have come to the right place. The stainless steel slotted channels are made of austenitic stainless steel (AISI 304) 1.4301, (AISI 316L) 1.4404 or (AISI 316Ti) 1.4571, according to the PN-EN 1253 standard. The trench gutter serves to collect medium and large amounts of water and to discharge the waste water into the sewage system. The slotted gutters are made of a 1.5 or 2 mm plate thickness, the slotted gutter has a bent or omega bottom and an integrated slope. Each slotted gutter has adjustable adjustable feet and concrete anchors to ensure installation and anchoring. The water that is drained into the gutter flows through a drain (with a removable stench trap and dirt bucket) into the sewerage system. The drain is always produced and connected to the gutter, so that together they form a whole.

Application options Stainless steel slotted gutters

The stainless steel slotted gutters are used in the food industry, industrial kitchens, swimming pools, saunas, in hotels, restaurants and other catering establishments. Also for applications in the non-residential construction, chemical and pharmaceutical industry. In addition, stainless steel drainage is also mandatory in areas where sanitary and hygienic regulations apply. Before proceeding to production, our engineers draw up what the gutter should look like in consultation with the customer. (width, length, height, slope, discharge, etc.). Before they leave the factory, the slotted gutters are completely pickled and passivated. It is also checked for dimensional stability and watertightness.

DOWNLOAD THE DOCUMENTATION FOLDER HERE

Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »