Menu
0
Voor 14:00 besteld? Vandaag verzonden!
Ruim 25 jaar ervaring
Grootste assortiment van Nederland
Telefonisch bereikbaar van 08.00 tot 20.00

Oil Separators - Petrol Separators

Oil separators, petrol separators or coalescence separators are available with CE marking (cheapest solution) or with KOMO approval.

Oil Separators - Petrol Separators

To separate mineral oil from water in a simple way, use an oil separator. The size of a petrol separator depends on the quantities of oil and water. Oil separators are used in places where there is a greater chance of mineral oil being discharged. Think, for example, of washing passenger cars and trucks. But also at workshops where people tinker with motor vehicles or at a gas station.

We offer you a complete and certified separator program. All our separators comply with the European standard NEN EN 858. This way you are assured of functional and durable products with proven performance and reliability. If desired, we will make the required capacity calculation for you, of course completely FREE!

 

Separators for all applications


We supply the right separator for every application. This way we always offer the best drainage solution. Can be delivered quickly and almost always from stock. We supply the following types of separators:


The available oil separators are distinguished by the CE marking or the KOMO quality mark. These separators specifically meet the European standard EN 858.
In addition to the separators, we also supply accessories such as alarm systems that warn you when the maximum oil collection and/or backflow in the oil separator has been reached.

The oil-fuel separator

Oil and its related oil products, such as gasoline and diesel, are extremely dangerous and bad for the environment when exposed. Yet it is these oil products that are indispensable to keep our economy going. These products are almost always found in vehicles, such as cars and trucks. Sometimes there will be leakage in the engine and then you can immediately see what damage oil products can cause. A large oil spot with distinctive rainbow colors appears on the road surface and is difficult to get rid of with water. Try to imagine what if such products end up in the environment and affect water and animals. This is why companies that work with oil products are obliged to use a separator. For example, a petrol separator is widely used in car garages, parking garages, petrol stations and car washes. This prevents petrol and diesel from entering the municipal sewer system or surface water.

How does the oil separator work?

A gasoline separator is also called an oil separator or hydrocarbon separator. Hydrocarbons are the components in crude oil that should absolutely not end up in open water. Together with water and other oil products, these hydrocarbons are discharged as waste water via a concrete tank, the actual petrol separator. Since the density of these hydrocarbons is much lower than water, they will separate in this pit and come to the surface. The separator has an automatic shut-off valve. This valve, also called a float, only floats on the water. The water will be discharged through the exit to the sewer or open water. The more oil that enters the tank, the lower the water level will be. The float will also sink more and more as a result. At a certain point, he closes the exit and no more water can be drained. This is a sign that the tank is full of hydrocarbon and needs to be cleaned. There are separators with and without sludge trap. Space is then reserved in the pit for sludge that has come along. If this is not present, a separate sludge trap must be installed.

The oil separators from DWTN

Do you need an oil separator? Then we recommend that you contact us or visit our webshop. We have different oil-petrol separators of different sizes. Thanks to our many years of experience, quality is guaranteed.


Your separator quickly at home


DWTN has a wide and deep range of separators. As a result, we can almost always deliver quickly from stock. Of course you can also pick up the separators. Need a quote? Please contact us directly. We will then provide a quote within 1 to 2 days!

 

Oil separators are used, among other things, for:

- gas stations
- garage companies
- workshops
- bus stations
- car washes / car wash
- washing places, spraying places
- transfer points of fossil fuels
- loading and unloading pits
- parking lots
- terrain drainage
- transformer houses
- along roads.

Due to the Environmental Management Act, these companies and bodies are subject to a permit and are therefore often obliged to provide an oil separator installation.

Oil separator standards & regulations according to European legislation:

Since 2006, the national regulations have been replaced by European regulations that apply throughout Europe. As a result, all old standards that were in force nationally have expired.

For oil separators, the European standard is EN858-1 (with reference sheet A1) and EN858-2. From September 1, 2006, all oil separators must comply with this and bear a CE mark. From 1 July 2013, the CE marking must be extended with a Declaration Of Performance (DOP). The Declaration Of Performance (DOP) indicates which requirements the product must meet and which test reports are available for the product in question.

An oil separator installation only suffices if it:

• Is of sufficient capacity (calculated according to EN858-2).

• The system has been completed and is working (according to EN-858-1).

• Timely maintenance and drainage by the recognized bodies.

 

EN858-1 & EN858-2 in combination with a CE marking and/or a KOMO approval, EC Declaration Of Performance (DOP) gives you as a user the certainty of a properly functioning system.

 

High quality concrete oil separators at very competitive prices:

DWTN guarantees high quality concrete separators. The housing of the concrete separator consists of a monolithically poured, watertight concrete pit, which is provided with a cover plate. The separator is made of high-quality concrete and has a watertight connection between the pit and the cover plate by means of a socket/spigot connection (using a sealing ring supplied). The housing is provided with a KIWA certificate based on BRL5070.

The sludge and oil separation zone are hydraulically optimized, so that the separator housing is compact and a high efficiency can still be achieved.

The coalescing filter in a class I version is easily removable for possible cleaning. The coalescing filter is located around the outlet chamber where the optimized float valve is located, which is fitted as standard in a class I & II separator. The efficiency when using a coalescing filter is <5mg/litre.



The price of an oil separator:

DWTN, supplies you with high quality oil separators and are offered at very competitive prices.

 

Please accept cookies to help us improve this website Is this OK? YesNoMore on cookies »

Subscribe to our newsletter

Subscribe

Create an account

By creating an account with our store, you will be able to move through the checkout process faster, store multiple addresses, view and track your orders in your account, and more.

Register

Recently added

You have no items in your shopping cart

Total incl. tax: €0,00
Order for another €1.815,00 and receive free shipping