Grid gutter Prefaest RI, self-supporting type I

The self-supporting RI 100 grid gutters from Stradal are marketed in the Netherlands by Diederen Afwateringstechniek. A self-supporting grid gutter.

offerte aanvragen
(vervangen)
€89,00 Excl. tax
€107,69 Incl. tax
Op aanvraag
offerte aanvragen
(vervangen)
€146,00 Excl. tax
€176,66 Incl. tax
Op aanvraag
offerte aanvragen
Sand trap RI 100N01 with cast iron ONDINE grate class F, 900KN
€352,00 Excl. tax
€425,92 Incl. tax
Op aanvraag
offerte aanvragen
(vervangen)
€89,00 Excl. tax
€107,69 Incl. tax
Op aanvraag
offerte aanvragen
(vervangen)
€146,00 Excl. tax
€176,66 Incl. tax
Op aanvraag
offerte aanvragen
Sand trap RI 100N06 with cast iron ONDINE grate class F, 900KN
€352,00 Excl. tax
€425,92 Incl. tax
Op aanvraag
offerte aanvragen
(vervangen)
€89,00 Excl. tax
€107,69 Incl. tax
Op aanvraag
offerte aanvragen
(vervangen)
€146,00 Excl. tax
€176,66 Incl. tax
Op aanvraag
offerte aanvragen
Sand trap RI 100N11 with cast iron ONDINE grate class F, 900KN
€352,00 Excl. tax
€425,92 Incl. tax
Op aanvraag

Grid gutter Prefaest RI, self-supporting type I

RI® line drainage channels have been the most sustainable solution for drainage projects for years.

 

Self-supporting RI grid channels from Stradal

The self-supporting RI grid channels (self-supporting drainage channels) from Stradal are marketed in the Netherlands by Diederen Afwateringstechniek. A self-supporting line drainage, fitted with a cast iron "Ondine" profile grating class D, 400KN or F, 900KN.

RI ® linear drainage channels, with a standard width of 100 mm, are a sustainable solution where drainage and rapid cleaning must go hand in hand. A C60/75 concrete quality and reinforcement in longitudinal and transverse direction make up this system
self-standing, making a concrete support back unnecessary in every traffic class. Because it is nodular cast iron
grille is clamped in the galvanized steel rebate in a durable way, the grille can be opened quickly,
after which the gutter can be easily cleaned. Corner solution elements, end outlets and sand trap elements belong
to the standard delivery program. If high demands are made on the quality of the gutter within a project, such as
in industrial areas, public roads and environmental stations, the RI ® drainage channel can be used without any problems.

In addition, RI® gutters are fitted with pre-assembled, specially developed, nodular cast iron grids. The profile ensures an optimal and fast absorption of water. The RI® gutters are also equipped with a stem/nut end. Thanks to the prepared sealant joint, it is possible to have a liquid-tight finish between the elements.

Advantages of RI® line drainage:

  • In accordance with NEN-EN 1433 (W+R), up to environmental class 5D
  • Reinforcement in longitudinal and transverse direction
  • Kitroom for liquid-tight finish
  • Galvanized steel edge profile, linked to reinforcement
  • Durable clamp construction for grid attachment
  • Sail/nut end
  • Ductile Iron Grid
  • Internal dimensions 100x100 mm to 100x150 mm
  • Traffic class D, 400KN and F, 900KN
  • Manning Strickler 95

Application areas:

  • platforms and aircraft stands
  • port areas
  • industry
  • environmental stations
  • fire training areas
  • visibly drain HWA
  • bus stations
  • downtown renewal
  • wadi crossings and bottom passages
  • fauna solutions

Download the brochure of the Urban-I grid gutter here

Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »